How to inspect card condition

Check common wear points on the front and back, from soft corners to surface marks that only show under angled light.

  1. Use a clean work surface

    Handle the card by its edges with clean, dry hands. Set it on a clean, flat surface with room to look at both sides. Leave a sealed card in its holder and inspect what you can see through the clear material.

  2. Look straight on for centering

    Compare left with right and top with bottom. Check the reverse as well. On a borderless card, compare the placement of printed features with an example from the same set.

  3. Follow the corners and edges

    Look for lifted fibers and flattened corner tips, then follow the perimeter for white spots, chips, and separation. It helps to switch between a light and dark background to see the outline.

  4. Change the angle for the surface

    View the card under diffuse light, then tilt it slightly to look for scratches, indentations, or print lines. Document what you see and which side it’s on. A photograph from one angle may hide a surface defect.

Back to collector resources